USA jobs
true toilet urinal attachment

Step-by-Step Guide to Installing Your True Toilet Urinal Attachment

No comments

Installing a True Toilet Urinal Attachment can be a practical and efficient upgrade for your bathroom. This guide will walk you through the process step-by-step, ensuring a smooth and successful installation.

 Gather Your Tools and Materials

Before you begin, make sure you have all the necessary tools and materials:

  • True Toilet Urinal Attachment kit
  • Adjustable wrench
  • Screwdriver (Phillips and flathead)
  • Teflon tape
  • Measuring tape
  • Pencil
  • Drill with appropriate bits

 Turn Off the Water Supply

Locate the water supply valve behind your toilet and turn it off. Flush the toilet to drain any remaining water from the tank. This step is crucial to prevent any water leakage during the installation.

Other Post You May Be Interested In

 Remove the Toilet Seat

Using the screwdriver, remove the bolts securing the toilet seat to the bowl. Set the seat and bolts aside, as you will need them later to reattach the seat after the installation.

 Position the Urinal Attachment

Place the urinal attachment on the toilet bowl, aligning it with the holes where the seat was attached. Use the measuring tape to ensure it is centered and level. Mark the position with a pencil.

 Secure the Urinal Attachment

Once you have the attachment in the correct position, use the screws provided in the kit to secure it to the toilet bowl. Tighten the screws with the screwdriver, ensuring the attachment is firmly in place but not over-tightened, which could crack the porcelain.

 Connect the Water Supply

Wrap the threads of the attachment’s water inlet with Teflon tape to ensure a watertight seal. Attach the water supply hose from the urinal attachment to the water supply valve. Tighten the connection with the adjustable wrench, making sure it is secure but not overly tight.

 Turn On the Water Supply

Slowly turn on the water supply valve and check for any leaks around the connections. If you notice any leaks, tighten the connections slightly until the leaking stops.

 Test the Urinal Attachment

Flush the toilet and test the toilet urinal seat attachment to ensure it is functioning correctly. Check for proper water flow and drainage. Make any necessary adjustments to the positioning or connections if needed.

 Reattach the Toilet Seat

Align the toilet seat with the attachment and secure it using the bolts and nuts you previously removed. Tighten the bolts with the screwdriver, ensuring the seat is stable and comfortable.

 Final Check

Perform a final check to ensure everything is in place and functioning correctly. Clean up any debris or water spills around the installation area.

Maintenance Tips

  • Regularly clean the urinal attachment to prevent the buildup of mineral deposits and ensure optimal performance.
  • Periodically check the connections for any signs of wear or leaks.
  • If you encounter any issues with the attachment, refer to the manufacturer’s manual for troubleshooting tips.

Conclusion

Installing a True Toilet Urinal Attachment is a relatively straightforward process that can enhance the functionality of your bathroom. By following this step-by-step guide, you can complete the installation with ease and enjoy the benefits of this convenient bathroom upgrade.

SHARE NOW
Tagged with

Leave a Reply

Your email address will not be published. Required fields are marked *