The Rockspace extenders are important for increasing the WiFi speed. But, users are facing slow internet speed because the Rockspace extender is installed in an inappropriate way. No issues, we will explain five mistakes that you should avoid while installing your extender.

What Is The Work Of Wireless Extenders?

Wireless extenders play a vital role in everyone’s life. We can’t do anything without it, because the extender acts like a bridge between the devices and internet signals. But, sometimes people face slow internet or other issues because they made mistakes during the Rockspace WiFi extender setup.

Place The Rockspace extender In the Right Location

Walls can disturb the wireless extenders. Wireless signals can be blocked by dense objects and obstructions. That’s why don’t put your extender near thick brick or concrete walls. If you want to get good signals throughout the home then locate your Rocspace extender in the central location on your premises. It is the best place where your devices can connect to the WiFi network easily. Many more objects create problems if you do not place your extender in a better place. A better place means where your extender can get high signals. Building materials also can reduce the strength of wireless signals.

The Electric Outlet Must Be Working

Be careful while putting the cable in the extender. As when we put the cable in the electric outlet we never check that. Though, it can be a major problem. It will take care of the connectivity problem investigation time. The electric outlet test will help you find a reliable electricity-supplying extension. Testing will also enable you to identify any problems you may have fast and correctly. 

Connect The Ethernet Wire Properly

The Ethernet cable is the basic part of your internet connection. Sometimes we face slow internet problems but do not check the cable. Check it and plug the wire tightly. Sometimes we see that the wire gets damaged very soon because of overheating. So, make sure to change the wire as it will cause issues like, it will break the signals. Which will make the internet connection fail so often.

Update The Firmware 

Simply make sure the extender is not up to date, and update your firmware as frequently as possible. As it can consume your bandwidth and disperse your network widely. It will turn into a big problem of slow internet and safety.

These errors won’t cost you much, but you can achieve a better WiFi connection and high internet speeds. So use the latest firmware version of the extender, it will help you get high-speed internet at your home and office. 

This problem also arises as sometimes the extender stops connecting. Are you facing a constant problem of extenders not connecting to the internet? We have also been watching this problem for the last couple of days. Additionally, we are also sharing the basic tips to resolve this problem. 

Basic Steps to Fix Extender Not Connecting Errors 

There are many different tricks to try to fix extenders not connecting issues. Some of the most basic yet effective steps to utilize for resolving extender connection issues are as follows: 

 

Disable The Wireless Card Settings 

Energy-saving option on your wireless card has been enforced, which can be a major problem. However, it can be the main reason for seeking your attention. 

In the lower right corner just beside the battery, you can check the further icons. Ensure to enforce your laptop so it can be balanced and power saver mode should be on your wireless card. 

This simple step can intensively increase the WiFi performance of laptops and routers as well. 

 

Easily Configure It With WPS Button

Choose the WPS button for the Rockspace WiFi extender setup and do the setup within a few seconds. 

• First, you need to press the WPS Button on the old router for a minimum of two or three seconds.
• Then the rest button on the extender within two minutes.
• If the LED is blinking on the Rockspace extender it means the router is in connection now.
• Once the signal LED light turns solid blue. Then the Rockspace extender has incredibly established a good connection with your old router and it can boost your Wi-Fi signal.
• Although in any case, the signal LED lights are red it means your extender is too far away from the router.
• In addition, if your network signals are off then your extender is not connected to your existing router, so try connecting it again.
• You should install the extender halfway between your existing router.
• If you have connected the extender with the WiFi device then you must connect to the extended network.
• The extender will use your existing Wi-Fi name.
• Sometimes, by default, the Wi-Fi password of your extender could be the same as one of your routers.
• Once you are in a good connection you can use it anywhere between the range.

 

Whenever people set up their wireless extenders, they make mistakes that they are also not aware of which leads to a reduction in the strength of wireless signals. So, if you are also one of those facing slow internet issues. Follow the above instructions attentively, for Rockspace WiFi Extender Setup.