Orbi mesh system works as the WiFi as well as extender when connected to your home modem. In the Orbi box, you will find Orbi router, two Orbi satellite, Ethernet cable, power cord, and a user manual.
Here, you will learn how to connect your Orbi router to the home modem via Ethernet cable, and how to log in to the Orbi interface to adjust its settings and networks using the URL orbilogin.net.
You also get to know how to connect the router to Orbi Satellites with the help of Sync button wirelessly. Let’s start the article without wasting any time.
How to Link Modem to Orbi Mesh System?
The modem to router link should be established without any error. So, you must check the cables are in good condition. Then start the setup by using down given steps.
- Place the Orbi router near to the modem and it should be on an optimal location.
- Take out the Ethernet cable and connect it to the router’s WAN port and LAN port of the modem.
- Now, you have to turn on the Orbi router by connecting the power cord to power port and inserting its adaptor to wall socket.
- Then simply press the power on/off button and turn it on.
Without connecting the Orbi satellites to the router the setup is incomplete, so link them to the router first wirelessly by following the next section.
How to Connect Orbi Satellite to Orbi Mesh System?
- Place the Orbi satellites in the reach of the Orbi router and turn them on by connecting their power cords to the wall socket and pressing the ON/OFF button.
- Now, hit the Sync button on both the networking devices and the connection will be established automatically.
It is time to log in to the Orbi mesh router interface with the help of the login URL orbilogin.net. All the steps are given right down in a section.
How to Log in to Orbi Interface via Computer?
Here, you will go through reaching interface process, in which you need to connect a computer to the Orbi router with the help of the LAN cable.
- After connecting the computer to the router, you have to go to the web browser of computer.
- Search the URL orbilogin.net or you can also use the 192.168.1.1 IP address.
- The search will take you to the interface login page, where you have to enter the login credentials.
- The username and password are given in to the user manual, just type them and reach the interface dashboard.
You have reached at the dashboard, where you can easily adjust the settings and networks of Orbi, update it, change admin password, and enable various features.
In the user manual you will find various troubleshooting tips which you must use, whenever Orbi purple light shows up. The purple light means the Orbi is facing the internet interruption; there can be many reasons like electronic devices, weak router to modem connection, and more others.
Ending Lines
Let’s end this informative article, in which you have learned how to install your new Orbi router device by using some easy steps. You also tour how to access the orbilogin.net interface by using your computer. Hopefully, you have get success to setup the Orbi router and satellites in your home.