To configure your Victony AC1200 setup, start by connecting it to your router using an Ethernet cable. Access the router’s settings through a web browser by entering the default IP address provided in the manual (usually something like 192.168.0.1). Log in with the default credentials (also in the manual) and follow the setup wizard. Choose a unique SSID and secure password for your wireless network. Adjust the wireless settings, including encryption (WPA2 is recommended for security), and configure the desired channel and bandwidth. Save the changes and restart the router if necessary. For advanced features, refer to the user manual or contact Victony’s support.
How do I manually use the Ac1200 extender?
- Place the extender in a location where it can still receive a strong Wi-Fi signal from your router but is close enough to the areas with weak coverage.
- Plug the AC1200 extender into a power outlet and wait for it to power on. Ensure the power LED is solid.
- On your computer or mobile device, go to the list of available Wi-Fi networks. Connect to the Wi-Fi network broadcasted by the extender. The network name (SSID) and password can usually be found on a label on the extender.
- Open a web browser and enter the default IP address of the extender (often something like 192.168.0.1) into the address bar. Log in using the default username and password (check the manual for this information).
- Follow the on-screen instructions to configure the extender. You may need to select your existing Wi-Fi network and enter the password. Set up a new SSID and password for the extended network.
- Save the changes and wait for the extender to restart. Once it’s back online, reconnect your devices to the new extended Wi-Fi network.
- Fine-tune the placement of the extender based on signal strength and performance. You may need to experiment with different locations for optimal coverage.
NOTE : if you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap setup.
How can I set up the WPS button on my range extender?
- Plug in your range extender and position it within range of your router.
- Locate the WPS button on your range extender.
- Press and hold the WPS button on your range extender.
- Within 2 minutes, press the WPS button on your router.
- Wait for the WPS LED on the range extender to become solid, indicating a successful connection.
- Your range extender is now set up using the WPS button. Place it in an area with weak Wi-Fi coverage, and it will extend your network.
Firmware update on Ac1200 setup?
- Connect your computer to the extender’s Wi-Fi.
- Open a web browser and enter the extender’s IP address (usually 192.168.0.1) in the address bar.
- Log in with your username and password (refer to the manual).
- Look for the “Firmware Update” or “Software Update” option.
- If an update is available, follow on-screen instructions to download and install it.
- Allow the extender to restart if necessary.
- Your firmware is now updated for improved performance and security.
How do the login process in Ac1200 extender set up?
- Connect your device to the extender’s Wi-Fi network.
- Open a web browser and enter the extender’s IP address (commonly 192.168.0.1) in the address bar.
- Enter the default username and password provided in the user manual or on the extender label.
- Once logged in, follow on-screen instructions to configure your extender settings.
How do I reset victony Ac1200 setup?
- Find the reset button on your Victony AC1200 Wi-Fi range extender. It’s usually a small button that may be recessed to prevent accidental presses.
- Ensure that the range extender is powered on and connected to a power source.
- Use a paperclip or a small, pointed object to press and hold the reset button. Hold it down for about 10-15 seconds. The reset process may take some time, so continue holding the button until you see noticeable changes in the device’s behaviour, such as blinking lights or other indicators.
- After holding down the reset button for the specified duration, release it. The device should then reboot, and the settings will be reset to the factory defaults.
- Allow some time for the extender to reboot and apply the reset. This process may take a minute or two.
- Once the device has rebooted, you’ll need to set it up again. Connect to its default Wi-Fi network (which might have a name like “Victony_Extender” or something similar), and access the setup interface through a web browser by typing in the default IP address (commonly something like 192.168.0.1 or 192.168.1.1).
- Follow the setup wizard to configure the Wi-Fi settings, including the network name (SSID) and password. You may need to refer to the user manual for specific instructions on setting up your particular model.