USA jobs
Emergency Exit Sign

Ensure the Safety of Your Projects by Installing an Emergency Exit Sign!

No comments

As a contractor, it is your responsibility to ensure that each aspect of the building meets the local safety regulations. To achieve this, you need to install one key safety feature which is the emergency exit sign. These signs are very important as they can help guide building occupants and crowds to exit the building in case of emergencies such as fire, power outages or any other life-threatening disaster. Therefore, as a contractor, you need to properly understand the importance of Emergency Exit Sign and how to install them to prevent injuries and fatalities. Without a properly installed emergency exit sign, most buildings can’t even pass safety regulations and might be shut down.

Let’s take a closer look at the wide array of benefits offered by emergency exit sign, where to install them to reap full benefits and the top 3 emergency exit signs to choose from. 

What Makes Emergency Exit Signs So Important?

Emergency exit signs play a key role in the safety plan of a building. Whether it is a commercial building, a rental complex or a football stadium, you need to install an emergency exit sign to ensure the safety of hundreds and thousands of people. If a disaster were to strike and occupants were unaware of exit points to avoid getting injured, they might get trapped and lose their lives. Therefore, not only do emergency exit signs help provide guidance during such hectic times, but they can also end up saving lives by streamlining the evacuation process.

 

Key Benefits of an Emergency Exit Sign: 

Following are some of the major advantages of installing emergency exit signs:

Other Post You May Be Interested In

  • Provides clear and concise directions during emergencies. 
  • It lowers the overall risk of injury and loss of life due to timely evacuation. 
  • In case of fire, it helps people avoid unsafe areas such as elevators. 
  • It helps make exit points more visible to occupants of the building. 
  • It helps support compliance with the building codes and helps pass safety regulations. 

Types of Emergency Exit Signs:

There are many different kinds of emergency exit signs which would be perfect additions to the building. The most common ones are:

  • Illuminated Exit Signs: This type of emergency exit sign is the most common. The reason behind the popularity of this emergency exit sign is that it comes with built-in lighting which remains visible in low light or smoky conditions.  It is powered by either electricity or batteries. 
  • Photoluminescent Exit Signs: These emergency exit signs tend to glow-in-the-dark and provide guidance without the need of electricity. These signs basically absorb sunlight during the daytime. 
  • LED Exit Signs: Modern buildings need to be sustainable in order to reduce power consumption. Therefore, you can opt to install these LED exit signs as they require less energy and are more durable. 

Where to Install emergency exit sign to Reap Maximum Benefits?

If you still unsure where you want to install these emergency exit signs to maximize their effectiveness, then you have come to the right place. You will have to install these emergency exit sign at strategic locations. In accordance with the safety codes, you need to install the emergency exit signs in such a position that they clearly mark the escape route and must be visible form any part of the building.

Here are the main areas that should be covered:  

  • It must be installed over doorways leading to emergency exits. 
  • It should be installed in hallways especially these corridors that are long and winding. 
  • To indicate safe routes to lower floors you should install them near stairwells. 
  • Above all the doors that lead to emergency exits. 

 

Tips for Maintenance of Emergency Exit Sign: 

Although, your job as a contractor ends with the installation of the emergency exit sign, it is vital that you ensure it is functional post-installation as well. You can get in touch with building owner or maintenance department and advise them to regularly maintain the emergency exit sign to ensure optimum working capacity.

You can provide the following instructions to clients to ensure proper working of the emergency exit sign:

  • They should check the illuminated signs on a monthly basis to make sure that they are working properly. 
  • For LED signs they need to change dead batteries periodically. In case of malfunction, the LED sign must be immediately repaired or changed. 
  • The maintenance staff should be advised to clean any dust built up on the signs regularly. 

 

Top 3 Emergency Exit Signs for Your Project: 

Here are the top 3 most in-demand emergency exit sign to add to your projects to increase the security and safety of the building occupants:

  • SPARKELEC Universal Wall & Ceiling Mount LED Exit Sign Gen2 LiFEPO4 Lithium Battery 
  • SPARKELEC Universal Wall & Ceiling Mount LED Exit Sign in BLACK 
  • BOXIT Ceiling Mounted – LED Exit 

Get the Best Emergency Exit Sign from AGM Electrical Supplies!

The emergency exit sign is an important safety feature that needs to be installed in all buildings that are under construction. You, as a contractor, need to install a good-quality and durable emergency exit sign that makes the building compliant with safety guidelines. Electrical Wholesaler It also ensures the safety of the building occupants. If you are looking to purchase a great-quality emergency exit sign from a wholesaler in Australia, then AGM Electrical Supplies is the perfect choice for you. So, what are you waiting for? Order top-quality electrical products for your projects today!

 

SHARE NOW
Tagged with

Leave a Reply

Your email address will not be published. Required fields are marked *