There are many mistakes we made during the bond cleaning while cleaning things all around the house that need to be fixed. So, in today’s article, we will share some very common mistakes you make while cleaning.
Moreover, we will tell you how to fix these mistakes so you can thoroughly clean your home without making any mistakes. Moreover, if you are looking for ways to be more efficient in maintaining your bond cleaning and doing it efficiently to get your full deposit amount back, Go through this article and clean your home because this blog is about the worst bond cleaning mistakes and how to fix them, so that will help you work fast and save time.
Worst Bond Cleaning Mistakes and How to Fix Them
Mistake 1: Delaying The Cleaning
While you are in a tenancy agreement, you have the advantage that you always know when your deadline is to vacate the home. However, you made a mistake at the time of the bond cleaning in that you delayed the time and waited until the last minute to start the bond cleaning. If you hire professional bond cleaning services in a hurry and do not provide enough time to clean, there is a chance that due to a shortage of time some areas will be left to clean, which can risk your bond money.
So keep in mind that you should not delay bond cleaning. If you are doing it on your own, do not wait until the last minute, and if you are hiring a professional, give them enough time to clean the property so you can get your full bond money back.
Mistake 2: Not Hiring Professionals
Sometimes the tenants try to clean the rented property on their own to save money, but they do not know they are making a huge mistake because they are not experts in bond cleaning and then have to spend a lot of time cleaning the house before vacating. No matter how deeply they try to clean, they will not match the professional level of cleaners. Further, the cleaning services have advanced tools and trained experts to clean your property.
So whenever you are vacating the house, hire professionals bond cleaner who provide the best bond cleaning services. It will save you time and money, if you want to know more pls visit o2ocleaning.
Mistake 3: Not Doing a Test With Carpet Cleaning Products
When you have a dried stain on the carpet from a few days ago, you spilled something on it and did not treat the stain immediately. Now you need to try a strong carpet detergent to remove the stain. However, whenever you are using a strong detergent on a carpet, always check the care label and read it carefully to check if the product you are using is suitable for your carpet or not. More importantly, if there is no care label available, do not put the detergent directly on your carpet because it can damage the fibers. Always do a spot test and check the detergent by putting it on a small area and checking for any discoloration or damage. If the detergent does not cause any discoloration or damage, you can use it to clean your carpet.
Mistake 4: Cleaning From The Bottom To The Top
While cleaning your home for bond cleaning, avoid the mistake of starting from the bottom to the top floor. If you are using this approach, you are creating more mess for yourself. By cleaning from bottom to top, you will have tracked stains to the area and rooms that you have already cleaned.
So while you are cleaning any area of your property, always start from the top. For example, if you’re cleaning your room, start by removing cobwebs from the ceilings, then dusting the walls, light fixtures, and ceiling fan, then move on to the wall hangings and window frames, and finally the baseboards and furniture. Then clean the floors to remove any loose dust.
Mistake 5: Soaking the Dirty Upholstery in Water
when you are cleaning your dirty upholstery with wine, coffee, or any other type of stain. Do not make the mistake of soaking up the upholstery with water, because treating it with water will make the stains bigger, and the stains will become stubborn to remove when there are liquids present in the cushion. Moreover, it will prevent your sofa set from drying properly, and mold will develop in it. Sometimes the surface of the sofa looks dry, but some of the water can accumulate beneath it and persist there for a few days after cleaning.
Mistake 6: Using Spray Cleaners on Electronics
Cleaning electronic devices like cell phones, LCD TVs, or computers with specific window cleaners or any other detergents can cause significant harm to the device. So, never make the mistake of cleaning it with detergent and a clean paper towel because the fibers can be very harmful. Use a microfiber cloth exclusively with a mixture of water and vinegar in the same quantity as a cleaner. Never spray the solution directly onto the screen; instead, spray it onto the microfiber, then gently clean the area.
Mistake 7: Vacuuming in the Wrong Direction
The worst mistake you can make for bond cleaning is to only vacuum in one direction, which will not only not remove the dust from the carpet but will also cause it to stick more to the carpet. So whenever you are vacuuming your carpet, always vacuum it forward and backward because some fibers have twisted fibers, so with this angle, you can reach those fibers and get better results, and your carpet will look clean and fresh.
Mistake 8: Scrubbing Stains out of Carpet and Upholstery
Avoid the urge to scrub vigorously at the stain on the furniture or on your carpet to remove it. Putting so much pressure on the stains can harm the surface of furniture and the fibers of the carpet. If the stain on the carpet is wet, always blot it to remove as much stain as possible with a soft cloth or paper towel before applying any detergent. If the stain is dried, it becomes more stubborn to remove. Apply the cleaner to the stain and then blot the stain.
Mistake 9: Spraying Surfaces Directly
Spraying a cleaning product directly onto the furniture and countertops of the kitchen will cause buildup on the surface, which will make it difficult for you to clean. It will also attract more dust and cause the surface to become sticky and greasy. To avoid this mistake, spray the detergent on the soft cloth rather than the surface you are going to clean.
Mistake 10: Not Managing The Tasks
If you are trying to do all the tasks at once, this is the worst mistake you can make while doing bond cleaning. So before you start cleaning the property, make sure to manage all the tasks so they can be done on time. Plan a strategy for a cleaning task, by splitting the tasks into smaller chunk sizes, which will make sure that you are cleaning efficiently.
Conclusion
Cleaning up the property at the end of a lease is tough, and that may be difficult, especially for beginners. As a result, making a mistake is to be expected, so you must work extra hard to avoid any mistakes so that when your landlord comes for the final inspection, he finds everything clean and you can receive the full amount of the deposited money.