Orbi mesh router system includes one Orbi WiFi router and two satellites that you have to connect with your home modem or ISP. It is easy to link and run internet services through the Netgear Orbi mesh router after configuring router settings via Netgear Orbi login interface.
The router must be connected to the modem using the Ethernet cable and then connect the satellite with the Orbi WiFi router wirelessly.
But, you can face troubles while connecting the router to the satellite like satellite sync button is not working or router is unable to connect with Orbi satellites.
Here, you will read possible reasons why router is not connecting to the satellite and how to solve it with the help of some tips and solutions.
Why Router Fails to Connect to Orbi Satellites?
There can be many reasons why your WiFi router cannot connect to Orbi satellite. We have made a list of causing factors that help you to find what the reason of the problem is in your case.
- The first reason of this connection problem is networking interruptions that are cause by electronic devices in your house.
- Damaged power cord or electric wall socket, which you are using to supply power to the router and satellite can be a reason of the mentioned issue.
- Incorrect Router to modem connection via the Ethernet cable can cause this router to satellite issue.
- Placing the satellite devices out the Orbi router reach in your house can also be a reason why your router is not connecting to the satellite.
So, above were the causing factors why your Orbi networking system not connection to each other. Now, have a look how to fix this problem with the help of some simple and easy troubleshooting tips and solutions.
How to Fix Router not Connecting to Satellite Issue?
Here, you will learn five tips and solutions that help you to solve the router to satellite disconnection issues.
1. Dispel Networking Interruptions
Electronic devices are reason of WiFi signal interruptions in your house. So, you must make sure that your router and satellites are far from electronic devices like microwave ovens. If you have seen one near Orbi system, then shift your router and satellites to another optimal location.
2. Check and Correct Router to ISP Link
Router to modem or ISP link is most important to establish Orbi mesh router system in your home. So, you have to be sure that the router is connected to the modem via Ethernet cable in the correct ports. The right pattern for connection is WAN port of the router and LAN port of the modem.
3. Make Sure Cables are not Damaged
The cable like Ethernet cable and power cord must be in good condition if not then replace them with a new one right away to establish a strong connection between the router and modem.
4. Place Satellites in Reach of WiFi
The satellites must be in the range of the Orbi WiFi router. To connect the router to satellites, you have to turn on the devices and press the sync button on both of them.
5. Reboot WiFi Router and Satellites
If tips (given above) won’t work then you should restart the router and satellites with the help of some steps written down here.
- To reboot the router, find and press the power button twice.
- To reboot the satellites, find and plug out the power cord and plug it again.
After solving the problem, you must access the interface by using orbilogin.net via computer and check for firmware updates
Last Note
Here, you have read possible reasons why your Orbi router not connected to the satellites. Then, you have learned how to solve this issue with the help of some troubleshooting tips and solutions easily.
